Skip to content

产品

螺杆式、无油式、活塞式与气体压缩机,干燥机、过滤器、鼓风机、储气罐与制气设备。

产品

16 个系列,共 71 款产品。可直接跳到某个系列,或者继续下拉。

空气压缩机

查看全部

2.2 至 355 kW 的螺杆式、无油式与活塞式压缩机。

螺杆式空气压缩机

直联传动螺杆空压机

直联传动螺杆空压机

电机直接联到主机头。55 至 250 kW,没有可打滑的环节。

容积流量(FAD)
7.8 – 43.0 m³/min
工作压力
7 – 13 bar g
电机功率
55 – 250 kW
了解更多
变频螺杆空压机

变频螺杆空压机

电机跟着用气量走。7.5 至 280 kW,8 至 13 bar g。

容积流量(FAD)
0.3 – 50.0 m³/min
工作压力
8 – 13 bar g
电机功率
8 – 280 kW
了解更多
双级螺杆空压机

双级螺杆空压机

分两步完成压缩。45 至 500 hp,4.5 至 12.5 bar g。

容积流量(FAD)
6.6 – 101.3 m³/min
工作压力
5 – 13 bar g
电机功率
45 – 355 kW
了解更多
永磁螺杆空压机

永磁螺杆空压机

IE4 与 IE5 等级电机,自带变频。20 至 500 hp。

容积流量(FAD)
0.3 – 109.0 m³/min
工作压力
7 – 30 bar g
电机功率
8 – 55 kW
了解更多
低压螺杆空压机

低压螺杆空压机

2 至 4.5 bar g,标准机在这里会白白浪费三分之一的电。

容积流量(FAD)
2.5 – 56.5 m³/min
工作压力
2 – 5 bar g
电机功率
30 – 160 kW
了解更多
中压螺杆空压机

中压螺杆空压机

13 至 25 bar g,不需要另配增压级。

容积流量(FAD)
8.5 – 25.0 m³/min
工作压力
20 – 30 bar g
电机功率
90 – 250 kW
了解更多
高压螺杆空压机

高压螺杆空压机

用螺杆机做到 20 至 35 bar g。45 至 330 kW。

容积流量(FAD)
2.8 – 43.7 m³/min
工作压力
20 – 35 bar g
电机功率
45 – 330 kW
了解更多
单相螺杆空压机

单相螺杆空压机

没有三相电的地方也能用螺杆机。2.2 至 7.5 kW。

了解更多
2.2 – 5.5 kW 螺杆空压机

2.2 – 5.5 kW 螺杆空压机

安静的带罐机型,适合车间和小型生产线。

容积流量(FAD)
0.2 – 0.7 m³/min
工作压力
10 bar g
电机功率
2 – 6 kW
了解更多
7.5 – 22 kW 螺杆空压机

7.5 – 22 kW 螺杆空压机

多数中小工厂的主力机型。

容积流量(FAD)
0.4 – 3.7 m³/min
工作压力
8 – 13 bar g
电机功率
8 – 22 kW
了解更多
23 – 29 kW 螺杆空压机

23 – 29 kW 螺杆空压机

气量上一个台阶,机房不必跟着变大。

容积流量(FAD)
0.9 – 5.5 m³/min
工作压力
8 – 13 bar g
电机功率
22 – 30 kW
了解更多
30 – 45 kW 螺杆空压机

30 – 45 kW 螺杆空压机

中型机房机器,带完整远程监控。

容积流量(FAD)
1.3 – 9.3 m³/min
工作压力
5 – 13 bar g
电机功率
30 – 45 kW
了解更多
55 – 75 kW 螺杆空压机

55 – 75 kW 螺杆空压机

适合连续、多班生产的大气量机型。

容积流量(FAD)
1.6 – 13.5 m³/min
工作压力
5 – 13 bar g
电机功率
55 – 75 kW
了解更多
90 – 132 kW 螺杆空压机

90 – 132 kW 螺杆空压机

以电费为主要成本的机房级机器。

容积流量(FAD)
5.1 – 24.8 m³/min
工作压力
5 – 13 bar g
电机功率
90 – 132 kW
了解更多
160 – 250 kW 螺杆空压机

160 – 250 kW 螺杆空压机

面向重工业的大型工频与变频机组。

容积流量(FAD)
5.8 – 48.0 m³/min
工作压力
5 – 13 bar g
电机功率
160 – 250 kW
了解更多

储气罐与储罐

查看全部

储气、分离,以及那只让压缩机不再频繁启停的罐子。

气体压缩机

查看全部

氮气、氧气、沼气、液化石油气、天然气、氨气、氩气与蒸发气。

制氧与制氢

查看全部

在自己厂内制气,不必再为瓶装气和运输付钱。

用于曝气与输送的大流量、低压空气。

压缩空气干燥机

查看全部

冷冻式、吸附式与膜式干燥,覆盖各种露点要求。

压缩空气过滤器

查看全部

颗粒、聚结与活性炭过滤。

在自己厂内制氮,不必再买瓶装气和付运费。

冷凝水处理

查看全部

零气损排水阀与油水分离器,实现合规、洁净的排放。

空气、氮气与氧气增压机

查看全部

把已有的压缩气体升到高压,无需从大气重新压缩。

工艺空气与气体设备

查看全部

离心机、膨胀机、热泵与工艺气体螺杆压缩机。

二手与翻新空压机

查看全部

经检修并带质保的机器,交期比新机短。

移动式空压机

查看全部

用于施工、钻探与检修作业的拖车式与橇装机组。

便携式专用设备

查看全部

高压增压机与现场专用机组。

干式真空泵

查看全部

气路中完全无油,用于洁净与工艺真空。

机械蒸汽再压缩(MVR)

查看全部

把乏汽重新压缩再用,而不是烧新的蒸汽。

概述

The whole range is below, grouped the way people ask for it rather than the way a catalogue files it. Most plants start with a compressor and end up buying the dryer, the filters and the receiver from the same team, because it is easier to hold one supplier responsible for the air than four.

Everything here is available in Pakistan, Saudi Arabia, the UAE, Oman and Türkiye, with parts held in each country.

How the range fits together

Compressors and air treatment is where most plants start. A compressor on its own puts water and oil into your pipework, so the dryer and the filtration are part of the same decision rather than a later one.

Portable plant is the same air delivered on a chassis: compressors built to be moved, dropped and left in the sun, for sites and projects rather than plant rooms.

Gas compressors and gas generation are the same engineering applied to something other than air — nitrogen, oxygen, hydrogen, biogas, LPG and ammonia — and vacuum is that engineering turned around, taking air away rather than delivering it.

  • Compressors, dryers and filtration as one system
  • Portable plant for sites and projects
  • Vacuum pumps for packaging, drying and process
  • Gas compressors and on-site gas generation
  • One supplier across the whole range
  • One service organisation behind them
  • Parts held in five countries
  • Machines of other makes supported too

从哪里开始

Tell us the duty rather than the model. What the air drives, how many hours a day it runs, and what it touches. Those three answers decide almost everything that follows.

If you do not know your demand we will measure it. A week of logging flow, pressure and power tells you more than any conversation, and it costs less than buying the wrong machine.

And ask for specific energy measured to ISO 1217 at your working pressure. Over ten years electricity is around three quarters of what a compressor costs you, so that single figure decides more than the purchase price does.

  • 工况、运行小时和接触对象决定规格
  • Demand measured rather than guessed
  • Specific energy to ISO 1217 for comparison
  • 在您决定之前先给出十年总成本
  • Written sizing with every quotation
  • 用小一点就够的时候,我们会如实建议
  • Local engineers in all five countries
  • Fixed price service plans

本系列的数据表

每份两页:这台机器是什么、用在哪里,以及实测数据表。内容由本站生成,因此数据表不可能说出页面上没有的话。

常见问题

What does your product range cover?

Air compressors, air treatment, vacuum, process air and gas, construction equipment and industrial tools, the complete compressed air chain, not just the compressor.

Where do I start if I do not know what I need?

With your air demand and required quality. Tell us the tools or processes and we work backwards to the machine, rather than starting from a model number.

Do you sell single machines or complete systems?

Both. Most customers come for a compressor and leave with a system, because the dryer, filters and pipework decide whether the compressor performs.

How do I compare two quotations?

On specific power at your working pressure, measured to ISO 1217, and on air quality to ISO 8573-1. Anything else is comparing headline prices.

Are the machines suitable for our climate?

They are specified for it. Ambient rating, cooler sizing and oil choice all change for Gulf and Pakistani summers, and we set them accordingly.

Can you supply to all five countries?

Yes, Pakistan, UAE, Saudi Arabia, Oman and Türkiye, with documentation and voltage set for the destination.

What about spares availability?

We only sell machines we can support. Before quoting we confirm parts availability in your country, because a cheap machine with no parts is not cheap.

Do you provide installation?

Yes, including pipework, electrical connection, commissioning and operator training. A machine installed badly never reaches its rated efficiency.

Can I see a machine before buying?

We can arrange a reference site visit or a demonstration unit for larger projects, so you see it working rather than on paper.

What documentation comes with a purchase?

Test certificate, manual, warranty terms, service schedule and the vessel certification. All of it before the invoice, not after.

相关产品

不确定该选哪个型号?

把您的用气量、工作压力和运行小时数发给我们。我们的工程师会完成选型并给出书面建议,不收费,也不构成任何义务。