Skip to content

二手与翻新空压机

经检修并带质保的机器,交期比新机短。

二手与翻新空压机

概述

Not every requirement justifies a new machine. A standby unit that runs forty hours a year, a temporary installation or a tight capital budget can all be served by a properly refurbished compressor.

The word that matters is 'properly'. Every used machine we sell is stripped in our own workshop, gets a new airend or a fully inspected one, new bearings, seals, coolers, filters and oil, is run-tested against its original performance figures, and carries a written twelve-month warranty on parts and labour.

主要优势

Rebuilt, not just cleaned

Airend inspection or exchange, new bearings, seals, coolers and consumables. Not a wash and a coat of paint.

Performance tested

Run-tested against original flow and power figures. The test sheet comes with the machine.

Twelve month warranty

Parts and labour, in writing, backed by the same service team that looks after our new machines.

Available now

Stock machines can usually be delivered and commissioned within a week.

我们是怎么翻新的

我们卖的每一台二手机都经过拆解、检查,并按书面标准重建,而不是擦干净挂到清单上。

首先评估的是主机头,因为它决定这台机器到底值不值得翻新。如果不值,这台机器不会上架。

您拿到的是您正在买的这台机器的性能测试结果,不是某个型号的。这就是翻新机和二手机之间的区别。

  • 按标准拆解、检查并重建
  • 先评估主机头,再看其他
  • 在实际那台机器上做性能测试
  • 随机提供测试结果
  • 所有易损件全部换新
  • 认真做好喷漆与外观
  • 含质保
  • 由我们的团队交付并调试

您应该问什么

问运行小时和保养履历,对两样都没有的机器要当心。只有小时数、没有履历,说明不了什么。

问那个序列号对应的性能测试报告。任何认真的翻新方都有,拿不出来的就是在估算。

问提供什么质保、覆盖哪些内容。我们的质保覆盖主机头,因为那是要紧的部件,也是我们评估过的部件。

  • 提供运行小时与保养履历
  • 按序列号出具性能测试报告
  • 质保覆盖主机头
  • 确认该型号的配件供应情况
  • 如实说明机器的年份与工况
  • 买新机更划算时会如实相告
  • 含交付与调试
  • 从第一天起就可纳入服务方案

配件与服务

翻新机进入和新机相同的保养计划,配件也由我们备着。这正是从一家会做维保的公司买二手机的主要理由。

如果某个型号的配件供应快到尽头,我们会说出来,因为一台便宜但背后没有配件的机器并不便宜。

交接时所有易损件都是新的,所以第一个保养周期从您接手那天开始算。

  • 与新机相同的保养计划
  • 售前确认配件供应情况
  • 交接时易损件全部为新
  • 配件即将断供时如实提醒
  • 本地有库存
  • 从第一天起就有服务方案
  • 可提供主机头置换
  • 保养价格固定

常见问题

What does refurbished actually mean here?

Stripped in our own workshop, airend inspected or exchanged, new bearings, seals, coolers, filters and oil, then run-tested against original performance figures.

What warranty do I get?

Twelve months on parts and labour, in writing, backed by the same service team that looks after our new machines.

How much cheaper is it?

Typically 40 to 55% of new price. Whether that is the right buy depends entirely on how many hours it will run.

When is a used machine a bad idea?

When it will run continuously. Over three years the energy difference against a modern variable-speed machine usually outweighs the purchase saving.

When is it a good idea?

Standby capacity, a temporary or project installation, a seasonal peak, or a genuinely tight capital budget. A machine that runs forty hours a year does not need to be new.

Do I get performance figures?

Yes, the run-test sheet comes with the machine, showing measured flow and power against the original specification rather than a claim.

How quickly can it be delivered?

Stock machines can usually be delivered and commissioned within a week, which is often the real reason customers choose one.

Can I trade in my old machine?

Yes, where it is worth refurbishing. We assess it and offer either a trade-in value or a scrappage against the replacement.

Is it serviced on the same plans?

Yes, identical service plans and intervals to a new machine, with the same parts stocked in country.

What is available right now?

Stock changes constantly. Ask us for the current list with hours, specification and price for your country.

相关产品

不确定该选哪个型号?

把您的用气量、工作压力和运行小时数发给我们。我们的工程师会完成选型并给出书面建议,不收费,也不构成任何义务。