Post-processing units for high pressure air
Drying and filtration in one package for 40 bar PET blowing air.
Technical data
- Free air delivery
- 1 – 55 m³/min (35 – 1,942 cfm)
- Working pressure
- 10 – 100 bar g
Overview
A PET blowing line runs on air at up to 40 bar, and that air has to reach the moulds dry and clean. A post-processing unit puts the drying and the fine filtration for that pressure into one package, instead of separate items assembled on site.
The SZP range covers flows from 1 to 55 Nm³/min at working pressures from 1.0 to 10.0 MPa, so one unit sits behind each high pressure compressor or booster.
Key benefits
Rated for high pressure
Working pressure from 1.0 to 10.0 MPa, the range a 40 bar PET line runs in.
Drying and filtration together
A pressure dew point of 2 to 10 °C and filtration to 0.01 µm from a single unit.
Low pressure loss
No more than 0.02 MPa lost across the unit, so the compressor does not have to make up for the treatment.
Hot inlet accepted
Takes inlet air at up to 80 °C.
Model range
Air cooled
- 10 – 100 bar g
- 1 – 1.6 Nm³/min
- Connection
- Rc 3/4
- 10 – 100 bar g
- 2 – 2.6 Nm³/min
- Connection
- Rc 1
- 10 – 100 bar g
- 3 – 3.8 Nm³/min
- Connection
- Rc 1 1/2
- 10 – 100 bar g
- 4.5 – 5.2 Nm³/min
- Connection
- Rc 1 1/2
- 10 – 100 bar g
- 6 – 7 Nm³/min
- Connection
- Rc 1 1/2
- 10 – 100 bar g
- 8 – 9 Nm³/min
- Connection
- Rc 1 1/2
- 10 – 100 bar g
- 10 – 11 Nm³/min
- Connection
- Rc 1 1/2
Air or water cooled
- 10 – 100 bar g
- 13 – 14 Nm³/min
- Connection
- Rc 2
- 10 – 100 bar g
- 15 – 16 Nm³/min
- Connection
- Rc 2
- 10 – 100 bar g
- 20 – 22 Nm³/min
- Connection
- DN65 flange
- 10 – 100 bar g
- 25 – 28 Nm³/min
- Connection
- DN65 flange
- 10 – 100 bar g
- 30 – 33 Nm³/min
- Connection
- DN65 flange
- 10 – 100 bar g
- 40 – 45 Nm³/min
- Connection
- DN80 flange
- 10 – 100 bar g
- 50 – 55 Nm³/min
- Connection
- DN80 flange
Performance to ISO 1217 Annex C at 20 °C inlet, 1 bar(a). Figures are typical and subject to confirmation. Ask us for the certified test report for your selected model.
Overall dimensions and net weight are supplied with the configured quotation and the arrangement drawing. Tell us the model and the duty and we will send both. Ask us
Technical data
- Working pressure
- 1.0 – 10.0 MPa
- Inlet temperature
- Up to 80 °C
- Pressure dew point
- 2 – 10 °C
- Filtration
- 0.01 µm
- Pressure loss
- 0.02 MPa or less
- Power supply
- 220 V single phase up to SZP-10/40, 380 V three phase above
Frequently asked questions
Which size do I need?
The one whose flow range covers the delivery of the compressor or booster in front of it. Send us that model and we will confirm the size.
Is it air or water cooled?
Units up to SZP-10/40 are air cooled. From SZP-13/40 upward they can be air or water cooled.
Related products
Refrigerant air dryers
The standard, low-cost way to reach a +3 °C pressure dew point.
- Free air delivery
- 1.5 – 383.33 m³/min (53 – 13,537 cfm)
- Working pressure
- 13 – 16 bar g
- Motor power
- 0.5 – 32.48 kW
Desiccant air dryers
Dew points down to −70 °C for critical and outdoor pipework.
- Free air delivery
- 6.7 – 141.7 m³/min (237 – 5,004 cfm)
- Weight
- 285 – 4,400 kg
Membrane air dryers
Silent, power-free drying for small flows and point-of-use.
Learn more
Heatless adsorption dryers
Minus 40 °C dew point with no heater. Simple, reliable, uses purge air.
- Free air delivery
- 1.2 – 80 m³/min (42 – 2,825 cfm)
- Weight
- 35 – 1,850 kg
Not sure which model you need?
Send us your air demand, working pressure and running hours. Our engineers will size the machine and send a written recommendation, no cost, no obligation.